Replace Nissan Key Fob Batteries

If your Nissan key fob isn't responding properly to your commands, it's a sign that its battery is dying. This is a simple fix that most people can handle themselves.

To replace the battery you can buy the new one from a hardware store or consult your owner's guide for the model you own.

The Battery is changed

The key fob on your Nissan model comes with a built-in battery that eventually loses its charge. The battery for the key fob can be changed in a matter of minutes. First, you'll need purchase an CR2032 replacement battery. It's a small coin cell battery that is used in most key fobs. It is available at a variety of convenience stores. To open the key fob, you'll also need a pair (latex or not) of gloves, as well as the small screwdriver flathead. Before starting, be sure to consult the owner's manual to find specific steps and directions.

Flip the fob upside-down and look at the backside. There is a tiny catch that you have to release by pulling it downwards. This will remove the mechanical key from the original position inside the fob.

Install the new battery and make sure that it's oriented correctly. Close the fob after the battery has been placed and click the two sides of the fob together. After completing this final step make sure to test your key fob by pressing the unlock button and observing what happens. If everything is in good and in good working order, you're ready to enjoy your Nissan's various features. After changing the battery, it is a good idea to re-program your key fob to ensure that it works correctly.

Replacing the Transmitter

Your key fob is the "key" for many of your vehicle's important functions. It could be a big blow should it become damaged or lost. If your key fob is dead or damaged key fob, you'll be without the ability to lock and start your vehicle.

It's a smart idea to keep a spare keyfob in reserve in case of emergency. The process of replacing your Nissan keyfob is relatively simple. You'll need a new battery and a small flathead screwdriver for removing the old one However, the process of replacing it is easy and will only take just a few minutes.

You'll require an oval Panasonic CR 2032 3V battery (you are likely to find them in multipacks for less than $5 USD). The battery is located in the back of the key fob. You'll require a small flathead screwdriver to gently split the two halves. Utilize a small screwdriver and pull the clip on the top of the battery to lift it out, making a note of the location. Replace the battery, then assemble the key fob. Check it out to confirm it is working.

As with all electronic devices such as your Nissan Intelligent Key will eventually wear out due to regular usage and require to be replaced. To avoid this issue, it's a good idea to protect your key fob from magnetic fields, water, and physical impacts, so be sure not to drop it or place too much pressure on it.

Replace the Key

If your Nissan Nv200 Key Programming key fob fails, you cannot use it to unlock your vehicle or to start it. This is a problem for those who have to travel to work in Detroit, run errands near Dearborn or go out for an evening on the town close to Troy.

The good news is, the battery in your Nissan smart key isn't a problem to replace. You can replace the battery at home or in the dealership. The cost of a replacement pack is usually $5 or less.

Begin by flipping the fob on its side and pushing a small latch on the back. This will open the mechanical emergency key. Although you won't be able to use the emergency key to start your vehicle but it will allow you to open the door.

Then you should look for a small gap on the top of the key fob casing. These are perfect to insert the screwdriver in the slit, which allows you to take the two parts of the key fob. Once you've gained access to the battery inside, pull it out and take note of its position. When you are in a position to reassemble your key fob, slide in the new battery and snap the two parts of the case back together. Insert the mechanical key and your Nissan smartkey will function as usual.

Other Issues

Many modern vehicles are equipped with key fobs that permit you to lock and unlock them without requiring keys for your car. The key fob works as a transmitter to connect to the computer system in the car.

If your Nissan key fob does not function after you have changed the battery it could be due to various reasons. For one, the new battery might not be seated properly inside the key fob. A reset of the key fob is also a possibility. Fortunately, this is an easy procedure that can be completed at home with the help of just a few tools.

For instance an electric screwdriver with a flat-headed tip to take out the battery that was in the key fob. Afterward, you can use an open-ended screwdriver the back of the key fob to insert the new battery. You'll also have to reprogramme your key fob in order for it to work with your vehicle.

Fortunately, the majority of Nissan key fobs are user-programmable, so you can easily accomplish this yourself. You can usually do this by inserting the key fob into the ignition twice in five seconds. If this does not work, you can take your key fob to a dealer or auto locksmith to have it programmed. The cost will differ based on the person who you contact and the kind of vehicle you own.